Types of
Band Mill Blades
The World´s Only Thin Kerf, Low Tensioned, Swedish
Silicon Steel 1", 1 ¼", 1 ½" and
2" Band Saw Blades.
Swedish silicon steel blades from
1- to 2 inches wide available for many applications.
Milled and induction hardened teeth in every blade we
make.
1 1/2" x
.056 band mill blades
Our 1 ½” x .056 thick blade is specially designed to run
on large band mills, headrigs and high production
resaws, such as the Wood-MizerÒ LT70/300, Baker 36
Series, LogMaster, Accu-Trac, S & W & vertical Amish
mills. This blade’s beam strength and gullet depth
combined with milled and induction hardened teeth allow
it to out perform any other blade that is presently
available today in both life & cutting speed.
2” x .052
band mill blades
Our 2” x .052 thick blade is specifically designed to
cut grade lumber on high-production band resaws, such as
the Brewco 800/1600/1800 and large band mills. This
blade has exceeded our expectations and has given our
customers both longer blade life and faster feed rates
over the bi-metal blades commonly run on these saws. At
approximately half the cost of a bi-metal blade this is
a true moneymaker.
1 ¼” x
.045 band mill blades
Our 1 ¼” x .045 thick blade has become our most
successful blade to date, running on small to medium
size band mills and resaws. This blade for its size is
more stable and will cut faster than any other blade on
the market.
1" x ¾"
pitch x .042
This blade is specifically designed to cut grade
hardwood on band resaws only. Expected production 5,000
+ B.F.P.D. (board feet per day) Available with .021 set
per side.
1¼" x ¾"
pitch x .042 and .045
These blades run best at 5,300 S.F.P.M. on 18" wheels or
larger. Expected production is about 1,600 to 2,000
B.F.P.D. Available with .019(frozen), .021(resaw),
.024(hardwood) and .029(softwood) set per side.
1¼" x 7/8"
pitch x .042 and .045
These blades run best at 5,700 S.F.P.M. on 18" wheels or
larger. Expected production is about 1,800 to 2,200
B.F.P.D. Available with .019(frozen), .021(resaw &
hardwood), .024(softwood) set per side.
1½" x 7/8"
and 1” pitch x .042
These blades run best at 5,700 S.F.P.M. on 18" wheels or
larger. Expected production is about 2,500 to 3,000
BF/Day. Available with .019(frozen), .021(resaw &
hardwood), .024(softwood) set per side.
1½" x 7/8”
pitch x .056
These blades run best at 5,700 to 6,300 S.F.P.M. on 24"
wheels or larger. Expected production is about 4,000 to
8,000 BF/Day. Available with .019 (frozen) and .026
(hardwood/softwood) set per side.
1½" x 1"
pitch x .056
These blades run best at 5,700 to 6,300 S.F.P.M. on 24”
wheels or larger. Expected production is about 4,000 to
8,000 BF/Day. Available with .018 (frozen) and .023
(hardwood/softwood) set per side.
2"x 1"
pitch x .042
This blade runs best at 5,700 to 6,300 S.F.P.M. on 18"
wheels or larger. Expected production is about 2,500 to
3,000 BF/Day. Available with .021(hardwood/softwood) set
per side.
2"x 1"
pitch x .052
These blades run best at 5,700 to 6,300 S.F.P.M. on 24"
wheels or larger. Expected production is about 8,000 to
25,000 BF/Day. Available with .018 (pallet/frozen) and
.023 (resaw/hardwood) set per side.
1 1/4"
Cobalt
This blade has highly hardened teeth and is used mainly
for recycling treated telephone poles and for cutting
exotic hardwoods.
